【【茂名】【本地】软管泵,路沿石成型机现货充足量大优惠】

生产工艺：本公司系列软管具有使用寿命长、适用范围广等特点，它结构是经过一层或多层高强度合成纤维编织层，增强了耐磨性、抗撕裂性软管的内衬和外衬均挤压成型，内衬采用一系列的复合橡胶。管体柔软，富有高强弹性，具有极优越的耐磨性能。采用新型原材料，增强管体的整体性能。在使用过程中生热低，弹性复原性好，经久耐用。胶管具有良好的耐正压和负压，具有良好的耐酸、碱、油、高温等特点，可以输送当今90%以上的化学品。主要成份有天然橡胶（耐一般的弱酸及酒精）、丁基橡胶（耐油脂、碱金属和清洁剂等）和三元乙丙橡胶（适用于酮、酒精及浓酸）等。软管的使用温度≤100℃，考虑生产过程中会产生热量，一般用于介质温度<80℃的工况。若在通风（或冷却）散热条件较好的情况下，介质温度可以到100℃。若物料温度≥120℃，需选用特殊耐热软管。输送有卫生级介质（如食品、医药等），可采用特制的卫生级软管。另可根据用户需要进行非标设计。     

工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

工业软管泵系列产品是吸收了国外先进技术而开发的一种新型的、多功能、多用途工业软管泵。我厂研发的高性能软管泵彻底摆脱了传统泵叶轮和轴密封的运行模式，对粘度大、腐蚀性大、流体杂质大的介质输送具有极大的优势，和传统蠕动泵输送泵有着截然不同的原理，应用范围广泛。

Industrial hose pump series is a new type, multifunctional and multi-purpose industrial hose pump developed by absorbing foreign advanced technology. The high-performance hose pump developed by our factory has completely rid of the traditional pump impeller and shaft seal operation mode, and has great advantages for medium transportation with high viscosity, corrosiveness and large fluid impurities. Different principles have a wide range of applications.